烫画机_气动双工位烫画机_仕林机械 优质商家

②高压烫画机，因其手柄结构采用的设计不同，同样的手动操作，按下去，能产生较普通平板烫画机大的压力。以上2类，多常见于工厂使用，因其价格低廉，工作方便效率较高。

?摇头烫画机，是手动烫画机中，产生压力zuì大的一种机型，其次它的外观设计时尚美观。常见于个人开店，自制烫画DIY使用。

High pressure painting machine， because its handle structure adopts the design different， same manual operation，高压烫画机， press down， can produce more ordinary plate to press the machine big pressure. The above two types are more commonly used in factories because of their low price and high efficiency.

It is a kind of machine with the biggest pressure in the manual stamping machine， and its appearance design is fashionable and beautiful. It is common in individual opening and DIY and DIY.

高压烫画机

操作流程：

1．手插电源，启动电源开关，气动双工位烫画机，电源指示灯指示；

2．将温控器调至所需温度，待温度到定温度后，温控器上部的指示灯熄灭，烫画机，即可开始工作；

3．将定时器调至所需时间；

4．将衣物平放在下烫板上，叠上烫画纸（请注意烫画纸的正反面），将手柄用力向下压，直至终点；

5．当指示烫印的设定时间到时，警报提示（蜂鸣器响），将手柄向上回原位。

High pressure stamping machine

Operation flow:

1. Hand in power， start power switch， power indicator light indicator;

2. Adjust the thermostat to the desired temperature. After the temperature has reached the fixed temperature， the indicator light on the top of the thermostat will be extinguished and the work will begin.

3. Set the timer to the required time;

4. Place the clothing on the bottom of the hot plate， and overlay the scald paper (please pay attention to the front and back of the painting paper)， press the handle to the lower pressure until the end;

5. When indicating the setting time for stamping， the alarm prompts (buzzer sounds)， and the handle is back in place.